Dry Sawdust

Our company receives about 300 tons of sawdust every month in the production of furniture panels and moldings. As most of you know green sawdust is a low value commodity that has limited markets and heavy trucking penalties due to its water content. Transportation and subsequent drying green sawdust requires additional costs. We invite you to have dry sawdust, moisture content of 8 to 10%. We produce dry sawdust, which is excellent raw material for the production of pellets, briquettes and board materials. It also may be used as a fuel, packaging, bedding, material for the construction, repair, agriculture etc. Dry sawdust can transported at half the trucking cost and has more market potential than green. It can be used for particleboard, pellets or wood composite extruded products. These uses are typically 5-10 times the value of sawdust in its green state.   If you would like... 

Edge glued panels

Edge Glued Panels (EGP) – are important component of high quality furniture. Lira’s edge glued panels have proved themselves well in this area because the company uses modern equipment and the latest production technology. EGP are made of solid wood lamellas (planks or blocks) glued together with PVA glue, which provides maximum strength in the joints. Lamellas could be fully solid or finger jointed depending on your requirements. By finger-jointing smaller planks into larger pieces and then gluing those into panels the existing defects like big knots, mineral insertion, discolorations and insect holes can be eliminated. The final product with its smooth joint tight surface and nice wood patterns is very stable and has a solid wood appearance. EGP may be used for the manufacture of table and kitchen worktops, doors, work bench boards, shelf bottoms, chests and wardrobe cabinets... 

New Lira Ltd profiled timber products

Lira Ltd began to produce new profiled timber products – beam imitation and terrace board. Beam imitation is dry, planed by all sides cladding board with tongue and groove connection. They are used for interior and exterior decorations of building’s  walls. Finishing by beam imitation does not take much time and makes construction more impressive. Narrower beam imitation boards (85-120 mm) are usually used for internal cladding and wider beam imitation boards are used for external cladding. The ceilings can be boarded with beam imitation too.   Main dimensions: 20 x 120 x 3000 mm Upon your request may be other dimensions Terrace board is corrugated profiled timber which prevents sliding. The board is produced according to the modern  German technology, the working surface gives the product extra strength and is easily washed by washing machines. Terrace board is a... 

Recent comments
    August 2020
    M T W T F S S
    « Apr